SPECIFICATIONS:
TOPS— 14-gauge, type 304 stainless steel, with
integrally formed backsplash and sanitary roll on three sides. Backsplashes are pre-punched for required faucet holes. Drainboards are corrugated die-stamped (CDZ™ Corrugated Dry Zone) and pitched toward the sink. All joints are seam welded and all visible welds are ground smoothed and polished.
TUBS— 14-gauge, type 304 stainless steel with 3-1/2” die-stamped center drain openings. All vertical and
horizontal corners minimal 5/8” radius cove. Tubs are
integrally welded on tops.
LEGS— Removable 1-5/8” O.D. stainless iron tubing legs with welded gussets and adjustable sanitary
bullet-type feet. Stainless steel legs and adjustable sanitary bullet-type feet available upon request.
MECHANICAL:
• Water supply is 1/2” IPS Hot and Cold.
• Faucet holes are on standard 8” centers.
• Faucet height is 36-1/2” from floor.
• Waste drains are 1-1/2” IPS. Stainless Steel. 3-1/2” Basket drains are included.
• All dimensions are typical TOL ± .110
FEATURES:
• New CDZ™ Corrugated Dry Zone
• All one-piece welded construction
• Radius die-stamped tub bottom for better
drainage
• All drainboards have integral backsplashes
• Gussets located on sink and tubs for
greater support
• Turned up backsplash
• Tubs with a depth of 12 ”, 16 ” and 18” are
available upon request
Meets or exceeds all
health standards. Reduces bacteria and odor.Allows air and water to flow under all washable items eliminating
suction and cross-contamination.
